Outboard Motor Bracket Mounting

Stainless steel model: Suitable for sailboat assistance and tailboard installation. It can be raised by 310mm or lowered by 70mm at the original fixed position, effectively increasing the depth of entry into the water.

Aluminum alloy model: It can be equipped with outboard motors of 15 horsepower or less. It can be raised by 250mm or lowered by 40mm from the original fixed position. The four-position adjustable handle fits the hull surface more closely, being both aesthetically pleasing and stable.

Outboard Motor Bracket Mounting is an indispensable configuration for boats. It can conveniently raise and lower the outboard engine to the appropriate position, making your vessel safer and more stable and extending the service life of the outboard engine.

Functions and Advantages

The main function of Outboard Motor Bracket Mounting is to enable the outboard motor to be raised or lowered quickly when needed. When the vessel is sailing on the water surface, the outboard motor is in operation. At this time, the outboard motor lifting bracket will lower the outboard motor to the water surface to ensure its normal operation. When the vessel is at anchor or in need of maintenance, the outboard motor lifting bracket can lift the outboard motor, preventing it from being damaged and also keeping water plants, debris and other debris from getting entangled in it. In addition, the lifting bracket for outboard engines can also enhance the safety and stability of ships and reduce potential safety hazards caused by outboard engines.

Types and Characteristics

Outboard Motor Bracket Mounting is mainly divided into two categories: manual type and electric type. Manual outboard motor lifting brackets usually adopt the lever principle, are easy to operate, and have a relatively low price. They are suitable for small vessels and occasional use scenarios. The electric outboard motor lifting bracket is driven by a motor, which is more effortless to operate, has a fast response speed, and is suitable for large ships and frequently used scenarios. In addition, depending on the installation location, the outboard motor lifting brackets can also be classified into stern installation type and hull installation type. The stern installation type outboard motor lifting bracket is usually located at the stern, occupies less space and is suitable for most vessels. The ship-mounted outboard motor lifting bracket is installed on both sides of the ship's rail, which can provide greater support force and is suitable for large ships and heavy outboard motors.

How to choose Outboard Motor Bracket Mounting?

When choosing the Mounting of Outboard Motor Bracket, the following factors are mainly considered:

First, select an appropriate size of outboard motor lifting bracket based on the model and power of the outboard motor to ensure it can bear the weight and torque of the outboard motor.

Second, the appropriate type of bracket should be selected based on the installation location.

Thirdly, high-quality products can offer better stability and durability. Choose the one with the best cost performance based on your actual needs.

Usage method

When using Outboard Motor Bracket Mounting, please pay attention to the following points: Firstly, do not use the outboard motor until it is ensured that it has been completely lowered and locked to avoid damage to the outboard motor caused by incomplete lowering or locking. Secondly, when the outboard motor is moored or under maintenance, it should be fully raised and locked to prevent water plants, debris, etc. from entangling the outboard motor. Secondly, when operating the outboard motor lifting bracket, follow the operation steps in the product manual to avoid failure or damage to the outboard motor due to improper operation. Finally, it is necessary to regularly inspect the condition of the outboard motor lifting support, and replace worn or damaged parts in a timely manner to ensure the normal operation of the outboard motor lifting support.